WS-C6K-13SLT-FAN2

WS-C6K-13SLT-FAN2

تومان

ناموجود

Product Description

Planning a proper location for the switch and the layout of your equipment rack or wiring closet is essential for successful system operation. You should install the switch in an enclosed, secure area, ensuring that only qualified personnel have access to the switch and control of the environment. Equipment placed too close together or inadequately ventilated can cause system overtemperature conditions. In addition, poor equipment placement can make chassis panels inaccessible and difficult to maintain.

Site Requirements

These sections describe some of the basic site requirements that you should be aware of as you prepare to install your Catalyst 6500 series switch. Environmental factors can adversely affect the performance and longevity of your system. Planning a proper location for the switch and layout of your equipment rack or wiring closet is essential for successful system operation. You should install the switch in an enclosed, secure area, ensuring that only qualified personnel have access to the switch and control of the environment. Equipment that is placed too closely together or that is inadequately ventilated can cause system overtemperature conditions leading to premature component failures. In addition, poor equipment placement can make chassis panels inaccessible and difficult to maintain.

The switch requires a dry, clean, well-ventilated, and air-conditioned environment. To ensure normal operation, maintain ambient airflow. If the airflow is blocked or restricted, or if the intake air is too warm, an overtemperature condition can occur. The switch environmental monitor can then shut down the system to protect the system components.

Multiple switches can be rack-mounted with little or no clearance above and below the chassis. However, when mounting a switch in a rack with other equipment, or when placing it on the floor near other equipment, ensure that the exhaust from other equipment does not blow into the air intake vent of the switch chassis. Refer to Table 2-2 for specific air flow clearances needed.

تماس جهت خريد

نام (الزامی)

نام شركت

آدرس پست الکترونیکی

شماره تلفن تماس (الزامی)

محصول درخواستي (الزامی)

تعداد

آموزش
نياز به آموزش داريد؟ (الزامی)

نصب و راه اندازی
نياز به نصب و راه اندازي داريد؟(الزامی)

پیام